Newland NLS-HR20-BT User Manual page 129

Enter Setup
Check Character Verification
AcheckcharacterisoptionalforMatrix2 of5andcanbeaddedasthelastcharacter.Itisacalculatedvalueusedtoverify the integrity of
the data.
Disable: The scanner transmitsMatrix 2 of 5 barcodes as is.
Do Not Transmit Check Character After Verification: The scanner checks the integrity of all Matrix 2 of 5 barcodes to
verifythatthedatacomplieswiththecheckcharacteralgorithm.Barcodespassingthecheckwillbetransmittedexceptthe last digit,
whereas those failing it will not betransmitted.
Transmit Check Character After Verification: The scanner checks the integrity of all Matrix 2 of 5 barcodes to verify that
thedatacomplieswiththecheckcharacteralgorithm.Barcodespassingthecheckwillbetransmitted,whereasthosefailing it will not
betransmitted.
Since Matrix 2 of 5 must always have an even number of digits, a zero may need to be added as the first digit when the
check character is added. The check character is automatically generated when making Matrix 2 of 5 barcodes.
** Disable
Transmit Check Character After Verification
IftheDoNotTransmitCheckCharacterAfterVerificationoptionisenabled,Matrix2of5barcodeswith
alengththatislessthantheconfiguredminimumlengthafterhavingthecheckcharacterexcludedwillnot
decoded. (For example, when the Do Not Transmit Check Character After Verification option is
enabled and the minimum length is set to 4, Matrix 2 of 5 barcodes with a total length of 4 characters
including the check character cannot beread.)
** Exit Setup
Do Not Transmit Check Character After Verification
be
116