Newland NLS-HR20-BT User Manual page 151

Enter Setup
Set Length Range for Code 11
The scanner can be configured to only decode Code 11 barcodes with lengths that fall between (inclusive) the minimum
and maximum lengths. To accomplish it, you need to set the minimum and maximum lengths.
Set the Minimum Length (Default: 4)
Ifminimumlengthissettobegreaterthanmaximumlength,thescanneronlydecodesCode11barcodes
witheithertheminimumormaximumlength.Ifminimumlengthissameasmaximumlength,onlyCode11 barcodes
with that length are to bedecoded.
Set the scanner to decode Code 11 barcodes containing between 8 and 12 characters:
1. Scan the Enter Setupbarcode.
2. Scan the Set the Minimum Lengthbarcode.
3. Scan the numeric barcode "8" from the "Digit Barcodes" section inAppendix.
4. Scan the Save barcode from the "Save/Cancel Barcodes" section inAppendix.
5. Scan the Set the Maximum Lengthbarcode.
6. Scan the numeric barcodes "1" and "2" from the "Digit Barcodes" section inAppendix.
7. Scan the Save barcode from the "Save/Cancel Barcodes" section inAppendix.
8. Scan the Exit Setupbarcode.
** Exit Setup
Set the Maximum Length (Default: 48)
138