Engine Stop Switch - KYMCO CV3 Series Manual

Park Alert Switch
: Push this switch to the left, all the Park Alert
Indicator (4 winkers, left and right, front and rear) will
flash.
OFF: Push this switch to the right, all the Park Alert
Indicator stop flashing.
Do NOT use the Fault Alert Light for prolonged period
after stopping the engine, or power of battery will deplete.
Engine Ignition Button
Be sure to pull up the front or rear brake lever when
starting the engine electrically. After that, push this
button to start the engine.
Caution
To prevent the battery voltage from becoming too low to
start the engine, if the motor is running slowly after
starting the engine, please send it to KUANG YANG
dealer for inspection.
Caution
Control Functions of Mechanism

Engine Stop Switch

: At this position ②, engine is stopped and cannot
be started; it requires switching back to " " position to
start the engine.
: At this position ①, starting the engine is allowed.
During normal riding, put the Engine Stop Switch at "
position. In the event of emergency, such as fuel cable
jam or vehicle tumbling, turn the switch to "
to force-stop the engine.
47
4
3
"
" position