KYMCO CV3 Series Manual page 63

Adjusting Windshield Height
1. Remove the screw and then remove the front
Windshield protection cover.
1: Front windshield protection cover
2. Remove Screws and Windshield.
Windshield
Control Functions of Mechanism
3. Remove the Windshield spacer holder.
1: Windshield spacer holder
4. Install the Windshield spacer holder at the most
appropriate position. Tighten screws to specified
torque.
5. Install the Windshield with screws to the fixing
position.
6. Tighten screws to specified torque.
Slackened Windshield can lead to accidents. Make sure
that screws are tightened to specified torque.
63
Warning
4
3