KYMCO CV3 Series Manual page 71

TPMS Learn Code Operation:
 Applicable to owner and dealer service personnel.
 Re-adjustment of TPMS is required when replacing a
new wireless tire pressure sensor and controller.
 When performing code learning, keep the vicinity clear
of other vehicle or transmitter, to prevent miss-
triggering.
Confirm that the electronic tire pressure detector has

been correctly installed, that the tire pressure meets
the intended pressure value and that the tires are
correctly installed.
Learn Code Activation Procedure:
1. Press and hold the "MENU" button in the center switch.
"MENU" button
Control Functions of Mechanism
2. Press the KEYLESS main switch to ON.
3. Wait until the image of tires appear and release the
"MENU" button.
4. TPMS is now entered into Code Learning Mode.
5. The red colored tire indicates it is under code-learning
state.
6. Flatten or refill the tire so that the change in tire
pressure is greater the 3 psi, then the sensor will be
activated within 1 min. Once there is a reading of the
tire pressure, the code-learning settings of a tire is
completed.
7. After the code-learning settings of a tire is completed,
it will automatically go to the next tire for code-
71
4
3