KYMCO CV3 Series Manual page 32

4
Control Functions of Mechanism
the power, the "noodoe system" will turn off the
Bluetooth / Online / Welcome function automatically.
If the battery is still inactive after starting the engine,
please contact your dealer for repair services.
 To conserve energy, the welcome light will turn off
after 2 minutes.
1. For enhancing accuracy of displayed weather and
local information, you should activate GPS and
Network functions of your cell phone. (In case of cell
phone signal failure, previous information will be
displayed until resumption of cell phone signal for
displaying accurate information).
2. Switching over of Speed / Temperature / Time units is
carried out from athe cell phone; minor differences
resulting from the frequency of data updating is within
a reasonable range.
3. Scanning speed and results of Bluetooth Device may
be limited in compatibility issues due to cell phone
specifications.
a. Scanning speed of Bluetooth Device is slow.
b. Pairing is unsuccessful.
c. Bluetooth error occurs during the link.
Caution
4. The User needs to set the cell phone's Cloud
Messaging function to facilitate noodoe message
display.
5. While driving, noodoe will not display any message
(including incoming call, message, LINE, FB, etc.).
When the vehicle stops, noodoe automatically
displays incoming calls and relevant information.
6. The last screen at the previous shut down will be the
first screen on a restart.
7. The compass function must be activated by
performing setup on a cell phone. Minor errors may
exist depending on data update frequency.
8. The compass only performs self-verification to modify
orientation when the vehicle starts to move, therefore
it is normal that no orientation calibration is activated
after connecting the noodoe App while the vehicle
has not yet started moving.
9. Time in noodoe will be calibrated automatically after
connecting noodoe with a cell phone.
10. The user shall never operate noodoe while riding the
vehicle or an accident may occur.
11. The action of the Welcome Light function can be set
using an app (enabled or disabled).
32
3