12V Power Socket - KYMCO CV3 Series Manual

12V Power Socket

1. 12V Power Socket2: Protection Cap
 This vehicle is equipped with the 12V power socket
on the left front side inside the storage box.
 Your may connect a low power consumption product
to the Socket, for charging the product while the
engine is running.
 The maximum load for the power socket: 25W Max.
 To avoid electrocution or short-circuit, make sure to
cover-up the protection cap after using the 12V
Power Socket.
 To prevent any accident from occurring, park your
Scooter at a safe location before using the 12V
Control Functions of Mechanism
Power Socket.
 12V Power Socket can only be used with a running
engine.
 To prevent power depletion of battery, do not charge
a product using the 12V Power Socket without
running the engine.
 To prevent fuse from being blown, do not charge a
product with a load exceeding 25W; if overheat
occurs during charging, the system will cut off power
supply automatically.
 After riding and before leaving the vehicle, make sure
the product is unplugged and the Protection Cap is
properly covered back.
 If the power is disconnected, reduce the load, turn off
the main switch and then restart the power.
 Do not attempt to alter the power to prevent
damaging the wiring system of the entire vehicle.
65
Warning
4
3