Commissioning; Connection Of Peripheral Devices - KERN DBS 60-3 Operating Instructions Manual

5.5 Commissioning

In order to obtain exact results, the appliance must have reached its operating
temperature (see warm-up time chap. 1).
For this warm-up time the appliance must be connected to the power supply.
The accuracy of the appliance depends on the local acceleration of gravity.
Strictly observe hints in chapter Adjustment.

5.6 Connection of peripheral devices

Before connecting or disconnecting of additional devices (printer, PC) to the data
interface, always disconnect the moisture analyser from the power supply.
Only use accessories and peripheral devices by KERN, as they are ideally tuned to
the appliance.
30 DBS-BA-e-1311