peplink PEPWAVE MAX BR2 Pro User Manual page 25

connected
DHCP Option 82
DHCP Server
DHCP Server
Logging
IP Range &
Subnet Mask
Lease Time
DNS Servers
WINS Servers
https://www.peplink.com
not act as a router, and most Layer 3 routing functions will cease to work.
Click on the question Mark if you want to enable DHCP Option 82.
This allows the device to inject Option 82 with Router Name information before
forwarding the DHCP Request packet to a PepVPN peer, such that the DHCP
Server can identify where the request originates from.
DHCP Server Settings
When this setting is enabled, the DHCP server automatically assigns an IP
address to each computer that is connected via LAN and configured to obtain an
IP address via DHCP. The Pepwave router's DHCP server can prevent IP
address collision on the LAN.
Enable logging of DHCP events in the eventlog by selecting the checkbox.
These settings allocate a range of IP addresses that will be assigned to LAN
computers by the Pepwave router's DHCP server.
This setting specifies the length of time throughout which an IP address of a
DHCP client remains valid. Upon expiration of the lease time, the assigned IP
address will no longer be valid and renewal of the IP address assignment will be
required.
This option allows you to input the DNS server addresses to be offered to DHCP
clients. If Assign DNS server automatically is selected, the Pepwave router's
built-in DNS server address (i.e., LAN IP address) will be offered.
This option allows you to optionally specify a Windows Internet Name Service
(WINS) server. You may choose to use the built-in WINS server or external
WINS servers.
When this unit is connected using SpeedFusion TM , other VPN peers can share
25 Copyright @ 2019 Pepwave