peplink PEPWAVE MAX BR2 Pro User Manual page 24

Name
VLAN ID
Inter-VLAN
routing
PepVPN Profiles
to Bridge
Remote Network
Isolation
Spanning Tree
Protocol
Override IP
Address when
bridge
https://www.peplink.com
Network Settings
Enter a name for the LAN.
Enter a number for your VLAN.
Check this box to enable routing between virtual LANs.
Layer 2 PepVPN Bridging
The remote network of the selected PepVPN profiles will be bridged with this local
LAN, creating a Layer 2 PepVPN, they will be connected and operate like a single
LAN, and any broadcast or multicast packets will be sent over the VPN.
Enable this option if you want to block network traffic between the remote
networks, this will not affect the connectivity between them and this local LAN.
Click the box will enable STP for this layer 2 profile bridge.
Select "Do not override" if the LAN IP address and local DHCP server should
remain unchanged after the Layer 2 PepVPN is up.
If you choose to override IP address when the VPN is connected, the device will
24 Copyright @ 2019 Pepwave