peplink PEPWAVE MAX BR2 Pro User Manual page 63

Management VLAN
ID
Operating
Schedule
A
Beacon Rate
Beacon Interval A
DTIM A
A
RTS Threshold
Fragmentation
A
Threshold
Distance / Time
Convertor
https://www.peplink.com
Advanced AP Settings
This field specifies the VLAN ID to tag to management traffic, such as
communication traffic between the AP and the AP Controller. The value is zero
by default, which means that no VLAN tagging will be applied.
NOTE: Change this value with caution as alterations may result in loss of
connection to the AP Controller.
Choose from the schedules that you have defined in System>Schedule. Select
the schedule for the integrated AP to follow from the drop-down menu.
This option is for setting the transmit bit rate for sending a beacon. By default,
1Mbps is selected.
This option is for setting the time interval between each beacon. By default,
100ms is selected.
This field allows you to set the frequency for the beacon to include delivery
traffic indication messages. The interval is measured in milliseconds. The
default value is set to 1 ms.
The RTS (Request to Clear) threshold determines the level of connection
required before the AP starts sending data. The recommended standard of the
RTS threshold is around 500.
This setting determines the maximum size of a packet before it gets fragmented
into multiple pieces.
Select the range you wish to cover with your Wi-Fi, and the router will make
recommendations for the Slot Time and ACK Timeout.
63 Copyright @ 2019 Pepwave