peplink PEPWAVE MAX BR2 Pro User Manual page 30

IP Address &
Subnet Mask
Name
VLAN ID
Inter-VLAN
routing
Captive Portal
DHCP Server
https://www.peplink.com
IP Settings
Enter the Pepwave router's IP address and subnet mask values to be used on
the LAN.
Network Settings
Enter a name for the LAN.
Enter a number for your VLAN.
Check this box to enable routing between virtual LANs.
Check this box to turn on captive portals.
DHCP Server Settings
When this setting is enabled, the Pepwave router's DHCP server automatically
assigns an IP address to each computer that is connected via LAN and configured
to obtain an IP address via DHCP. The Pepwave router's DHCP server can
30 Copyright @ 2019 Pepwave