peplink PEPWAVE MAX BR2 Pro User Manual page 29

- Advanced feature, please click the
A
Finally, if needed, configure Bonjour forwarding, Apple's zero configuration networking
protocol. Once VLAN configuration is complete, click Save to store your changes.
Enable
Bonjour Service
To enable VLAN configuration, click the
To add a new LAN, click the New LAN button. To change LAN settings, click the name of the
LAN to change under the LAN heading.
The following settings are displayed when creating a new LAN or editing an existing LAN.
https://www.peplink.com
If a SpeedFusion TM
resolver IP address(es). Queries will be forwarded to the selected
connections' resolvers. If all of the selected connections are down,
queries will be forwarded to all resolvers on healthy WAN connections.
button on the top right hand corner to activate.
Bonjour Forwarding Settings
Check this box to turn on Bonjour forwarding.
Choose Service and Client networks from the drop-down menus, and then click
to add the networks. To delete an existing Bonjour listing, click
button in the IP Settings section.
peer is selected, you may enter the VPN peer's DNS
29
.
Copyright @ 2019 Pepwave