Keyboard Support; Lock-Out Link Mode - Opticon Code Reader 2.0 User Manual

4.7 - Keyboard Support

Scan the following codes to set appropriate keyboard mapping:
US English (Default)
No Leading 0
French
Universal Keyboard

4.8 - Lock-out Link Mode

This mode can be used to establish a permanent connection between the reader and a CodeXML modem,
Prepare the reader to communicate in 'RF Comm Mode' by scanning the QuickConnect code on the
paired modem to which you wish to establish a permanent link. Listen for the single beep to verify the
connection acknowledgement. Scan the Lockout Link Mode code (see below). Set appropriate timeout
settings, if applicable (see Section 1.4.5).
To reassign a permanent connection to a different reader, scan the unlock link code. Using the 'new'
reader' follow the directions outlined in the previous paragraph.
Lockout Link Mode
Save Settings
US English - Leading 0
German
Custom Keyboard
Request that map be
installed.
Unlock Link Mode
US English - ctrl + char
For Non-Printable ASCII
Japanese
C001537_13_CR2 User Manual 50