Keyboard Wedge And Usb Option - Opticon RS232 User Manual

Manual No. 25-ULGPMU01-01
Keyboard Wedge and USB options
With Keyboard: Use this mode in case a keyboard is connected to the PC wedge Y-cable. The Wedge is only listening in case the
computer is booting or the wedge is idle.
Without Keyboard: Use this mode in case no keyboard is connected to the PC wedge Y- cable. In some cases, this mode is
required when a PC USB keyboard is connected. If this option is enable, the computer detects the wedge as a keyboard. If the
computer reports a keyboard error or in case no data is displayed, try this option. It is required to power OFF the PC, wait 10
seconds and power ON the PC.
NOTE: Do not enable 'without keyboard' option when a keyboard is connected to the Y cable. The 'without keyboard' option is
only supported for PC/AT wedges.
ZZ
KM
KL
ZZ
Start
Program Menu
With keyboard
Without keyboard
End
Program Menu
Series LGP Handheld CCD Scanner
[[
LN
LM
[[
Page 7