Reader Id And Firmware Version; Reader Settings Lock - Opticon Code Reader 2.0 User Manual

4.5 - Reader ID and Firmware Version

To find out the Reader ID and firmware version, open a text editor program (i.e., Notepad, Microsoft
Word, etc.) and read the following code:
Reader ID and Firmware
You will see a text string indicating your firmware version and CR2 ID number (see below):
Xap/iVVVVWWWWXXXXSSSSSSSSSSPXXX-XX+XX
Xap/i - Opticon Internal ID (not applicable)
VVVV is the application firmware version number
WWWW is the bootloader firmware version number
XXXX is the radio firmware version number
SSSSSSSSSS Reader's serial number (ten digits)
P is "A" if running firmware is the application, "B" if BootLoader
XXX-XX+XX - Internal ID (not applicable)
Example:
Xap/i3000300006000010002363A06D-SD+SQ
Note: Opticon will periodically release new firmware for CR2 units. For information on latest firmware
versions, call Opticon at (800) 636-0090. To upgrade firmware, please visit our website at
http://www.opticonUSA.com and follow instructions provided.

4.6 - Reader Settings Lock

To lock or unlock the current settings on your reader please scan the codes below:
Reader Settings Locked
NOTE: Prefix and Suffix programming codes, memory transfer and delete commands, "Clear All
CodeXML Rules" and "Suffix -Erase/None"commands are not locked by this feature.
Save Settings
Reader Settings Unlocked
C001537_13_CR2 User Manual 49