AJAX KeyPad Fibra User Manual page 24

Brightness
Buttons Volume
Alert with a siren if panic button is pressed
Fibra Signal Strength Test
User Guide
Temporary Deactivation
30 minutes
60 minutes
90 minutes
180 minutes
Selecting the brightness of the keypad
backlight: 0 to 5 (0 — backlight is off, 5 — very
bright backlight).
The backlight is on only when the keypad is
active.
This option does not affect the brightness level
of the security mode indicators.
Selecting the sound volume level when pressed:
0 to 14 (0 — the sound of pressing is disabled,
14 — very loud sound of pressing).
The option is available only if for the Function
button the Alarm operation mode is con gured.
When the option is enabled, the
connected to the security system give an alert
when pressing the Function button.
Switches the keypad to the Fibra signal strength
testing mode.
The test allows you to check the signal strength
between the hub and the keypad over the Fibra
wired data transfer protocol to determine the
optimal installation location.
Learn more
Opens the KeyPad Fibra User Manual in the Ajax
app.
Allows the user to disable the device without
removing it from the system.
Three options are available:
Entirely — the device will not execute
system commands or participate in
sirens