AJAX KeyPad Fibra User Manual page 21

Lid
Temporary Deactivation
Firmware
Device ID
Device №
Bus №
Settings
To change the keypad settings in the Ajax app:
The status of the tamper that responds to
detachment of the device from the surface or
opening of the enclosure:
Closed — the keypad is installed on the
SmartBracket mounting panel. Normal state
of the enclosure.
Open — the keypad is removed from the
SmartBracket mounting panel or the
enclosure integrity is otherwise
compromised. Check the state of the
keypad enclosure.
Learn more
Shows the status of the device temporary
deactivation function:
No — the device operates in normal mode
and transmits all events.
Lid only — a user with system con guration
rights has disabled tamper triggering
noti cations.
Entirely — a user with system con guration
rights has excluded the keypad from the
system operation. The device does not
follow system commands and does not
report alarms or other events.
Learn more
KeyPad Fibra rmware version.
KeyPad Fibra ID (serial number). Also available
on the back of the keypad enclosure and on the
packaging.
KeyPad Fibra loop (zone) number.
The number of the Fibra line of a hub to which
KeyPad Fibra is physically connected.