AJAX KeyPad Fibra User Manual page 17

device — hub). This improves the antisabotage protection of the system.
12. Connect the backup battery and external power supply to the hub. Turn on
the hub.
13. Reattach the keypad to the SmartBracket mounting panel. Fix the keypad
with the bundled screw at the bottom of the enclosure.
14. Add device to the system
15. Run a Fibra Signal Strength Test
or three bars. If the signal strength is one or zero bars, check the connection
correctness and the cable integrity.
Adding to the system
The keypad is compatible only with
can only be added and con gured through the PRO app by a user with administrator
rights.
Types of accounts and their rights
Before adding a device
1. Install the PRO app
don't have one.
2. Add a hub compatible with the device to the app, make the necessary
settings, and create at least one
3. Make sure that the hub is on and has Internet access via Ethernet and/or
mobile network. You can check the connection in the Ajax app or by looking
at the LED on the hub board: it should light up white or green.
4. Make sure the hub is not armed and does not start updates by checking its
status in the Ajax app.
5. Make sure the device is physically connected to the hub.
.
. The recommended signal strength is two
Hub Hybrid (2G)
. Log in to a PRO account
virtual room
and Hub Hybrid (4G) . Fibra devices
or create a new account if you
.