Table of Contents
Advertisement
7. Set the duress code. Contains from 4 to 6 digits.
8. Press Done.
9. Click Save to save the changes.
Security modes control using access codes
Using common or personal code, you can control the
security of the entire object or separate groups. Entering the code should be
con rmed by pressing one of the buttons
Night mode
). Erroneously entered digits are reset with the button
KeyPad Fibra is locked for the time speci ed in the settings if an incorrect password is
entered three times in a row within 1 minute. The corresponding noti cations are sent to
users and to the monitoring station of the security company. A hub administrator or PRO
with administrator rights can unlock the keypad in the Ajax app.
Security control of the object using a keypad code
1. Activate the keypad by touching any touch button.
2. Enter the Keypad Code.
3. Press the button
For example, to arm the system:
Security control of the group using a keypad code
Arming with a personal code
In progress
Arming with a common code
In progress
(Arm),
(Disarm) or
1234 →
Night mode
(Arm),
(Disarm) and
(
Night mode
).
and the
(enable
.
Advertisement
Table of Contents
Need help?
Do you have a question about the KeyPad Fibra and is the answer not in the manual?