AJAX KeyPad Fibra User Manual page 20

States
The states include information about the device and its operating parameters.
The states of KeyPad Fibra can be found in the Ajax app:
1. Go to the Devices
2. Select KeyPad Fibra from the list of devices.
Parameter
Malfunction
Temperature
Fibra Signal Strength
Connection via Fibra
Bus Voltage
tab.
Clicking on
malfunctions.
The eld is displayed only if a malfunction is
detected.
Device temperature. Measured on the
processor and changes gradually.
Acceptable error between the value in the app
and the room temperature is 2°C.
The value is updated as soon as the device
identi es a temperature change of at least 1°C.
Signal strength between the hub and KeyPad
Fibra. The recommended value is two or three
bars.
Fibra is a protocol for transmitting KeyPad Fibra
events and alarms.
Learn more
The connection status between the hub and
KeyPad Fibra:
The voltage value on the Fibra line to which the
keypad is connected.
Meaning
opens the list of KeyPad Fibra
Online — the keypad is connected to the
hub.
O ine — the keypad has lost connection
with the hub. Check the keypad connection
to the hub.