Led Indication - AJAX KeyPad Fibra User Manual

1. Activate the keypad by touching any touch button.
2. Enter the User ID
3. Press the * (Function button).
4. Enter the User Duress Code.
5. Press the (Disarm) button.
For example:

LED indication

KeyPad Fibra can report the current security mode, button pressings,
malfunctions, and other conditions with LED indication and a sound signal.
The current security mode is displayed by the backlight after the keypad is
activated. The information about the security mode is relevant, even if it is
changed using another Ajax device (
Event
Touch button pressed.
The system is armed.
The system is disarmed.
.
2 → * → 4422 →
SpaceControl
LED indication
Short beep, the current system
security status LED blinks
once.
Short beep, Armed or Night
mode LED lights up.
Two short beeps, Disarmed
or another keypad) or an app.
Note
The volume of the beep and
the brightness of the backlight
depend on the keypad
settings.