AJAX KeyPad Fibra User Manual page 25

Unpair Device
Codes setting
Keypad access code
To generate a keypad access code, in Ajax apps:
1. Go to the Devices
2. Select the keypad for which you want to set up an access code.
3. Go to Settings by clicking on the gear icon
4. Find the Keypad Code item and click it.
5. Set the keypad code. Contains from 4 to 6 digits.
6. Press Done.
User access code
Registered user access code
Each user registered in the system can set a personal access code. To do this in
the Ajax app:
1. Go to the Devices
2. Select a hub.
Learn more
Unpairs KeyPad Fibra from the hub and deletes
its settings.
menu.
menu.
automation scenarios, and the system will
ignore device alarms and other noti cations.
Lid only — the system will ignore
noti cations about the triggering of the
device tamper only.
No — the device operates in normal mode.
.