AJAX KeyPad Fibra User Manual page 22

1. Go to the Devices
2. Select KeyPad Fibra from the list.
3. Go to Settings by clicking on the gear icon
4. Set the required settings.
5. Click Back to save the new settings.
Settings
Name
Room
Group Management
Access Settings
tab.
Keypad name. Displayed in the list of hub
devices, text of SMS and noti cations in the
events feed.
To change the name, click on the text eld.
The name can contain up to 12 Cyrillic
characters or up to 24 Latin characters.
Choosing a KeyPad Fibra virtual room.
The room name is displayed in the text of SMS
and noti cations in the events feed.
The parameter is available only when
mode
Each keypad can be con gured to control a
separate security group. By default, the keypad
controls all security groups in the system.
When
controls the security of the entire system.
Setting the method to control system security
modes:
.
Meaning
is enabled.
group mode
is disabled, the keypad
Keypad codes only — a common keypad
code is used to change the security mode.
User codes only — personal user codes are
used to change the security mode.
Keypad and user codes — to change the
security mode, both the common keypad
code and personal user codes are used.
group