Table of Contents
Advertisement
Recommended cable types:
U/UTP cat.5 4 × 2 × 0.51, copper conductor.
Signal cable 4 × 0.22, copper conductor.
If you use a different type of cable, the communication range for wired connections may
vary. No other types of cables have been tested.
Veri cation using a calculator
To make sure that the project is calculated correctly and that such a system will
work in real practice, we have developed a communication range calculator of
Fibra lines
(in
progress). The calculator helps to check the quality of
communication and cable length for wired Fibra devices with the selected
con guration at the system design stage.
Additional information
The maximum current that Hub Hybrid can supply in total for all Fibra lines
is 600 mA. The total current consumption of the devices in the system
depends on the type of cable, its length, the type of connected device, the
quality of the connection of conductors, and other factors. Therefore, after
selecting devices, we recommend verifying the project using the
calculator
.
Up to 100 devices can be connected to Hub Hybrid at default settings.
Preparing for installation
Cable arrangement
Fibra
Advertisement
Table of Contents
Need help?
Do you have a question about the KeyPad Fibra and is the answer not in the manual?
Questions and answers