AJAX KeyPad Fibra User Manual page 29

1. Activate the keypad by touching any touch button.
2. Enter the Keypad Code.
3. Press the Function button.
4. Enter the Group ID
5. Press the button
For example, to arm the group:
If a security group is assigned to the keypad in its settings, you do not need to
enter the group ID. To control the security of this group, it is enough to enter the
keypad code or user code.
If KeyPad Fibra is con gured to control a separate security group, enabling the
mode for this group is only possible with a user code. The user should have an access
right to control this group.
Rights in the Ajax security system
Security control of an object using a user code
1. Activate the keypad by touching any touch button.
2. Enter the User ID
3. Press the Function button.
4. Enter the User code.
5. Press the button
For example, to arm the system:
Security control of the group using a user code
.
(Arm), (Disarm) or
1234 → * → 2 →
.
(Arm), (Disarm) or
2 → * → 1234 →
( Night mode ).
( Night mode ).
Night