Detergents And Care; Products; Basic Operation; Switching On The Appliance - Siemens WM14VMHADN User Manual And Installation Instructions

Hide thumbs Also See for WM14VMHADN:
Table of Contents

Advertisement

12 Detergents and care

products

The manufacturer's instructions for
use and dosage can be found on the
packaging.
Notes
¡ Only use liquid detergents that are
self-flowing
¡ Do not mix different liquid deter-
gents
¡ Do not mix detergent and fabric
softener
¡ Do not use products that have ex-
pired or are highly congealed
¡ Use dyes sparingly as salt may
damage stainless steel
¡ Do not use color-bleaching agents
in the appliance
operation
13 Basic operation
operation
13.1 Switching on the appli-
ance
Requirement: The appliance has
been correctly installed and connec-
ted.
→ "Installation and connection",
Page 12
Press
.
The switch-on process takes a few
seconds.
Note: The lighting for the drum goes
out automatically.
13.2 Setting a programme
Turn the programme selector and
1.
set the required programme.
→ "Programmes", Page 24
Detergents and care products en
If required, adjust the programme
2.
settings.
→ "Adjusting the programme set-
tings", Page 29
13.3 Adjusting the pro-
gramme settings
Requirement: A programme has
been set.
→ "Setting a programme", Page 29
Adjust the programme settings.
→ "Buttons", Page 22
Note: The programme settings are
not saved permanently for the pro-
gramme.
13.4 Loading laundry
Note: To prevent creasing, note the
maximum load for the programmes.
→ "Programmes", Page 24
Requirements
¡ The laundry is prepared and sor-
ted.
→ "Laundry", Page 28
¡ The drum is empty.
Open the door.
1.
Place the laundry in the drum.
2.
Close the door.
3.
Ensure that there is no laundry
trapped in the door.
13.5 Inserting the measuring
aid for liquid detergent
If you order the measuring aid as an
accessory, you must use the measur-
ing aid.
Pull out the detergent drawer.
1.
29

Advertisement

Table of Contents
loading

Table of Contents