Jumper Setting Description - Boser HS-6200 Manual

2.6 Jumper Setting Description

A jumper pin-set is ON as a shorted circuit with a plastic cap inserted
over two pins. A jumper pin-set is OFF as a open circuit with a
plastic cap inserted over one or no pin(s) between pins. The below
figure 2.2 shows the examples of different jumper pin-set setting as
ON or OFF in this manual.
All jumper pin-set already has its default setting with the plastic cap
inserted as ON, or without the plastic cap inserted as OFF. The
default setting may reference in this manual with a " * " symbol in
front of the selected item.
12
Figure 2.2