Advancedtca And Amc Commands - Kontron AM4024 User Manual

10.3.2 AdvancedTC A and AMC Commands
The following table shows an excerpt from the command list specified in the PICMG 3.0 R 2.0 Ad-
vancedTCA Base Specification and the PICMG AMC.0 Advanced Mezzanine Card Specification, R 1.0. The
shaded table cells indicate commands not supported by the IPMI firmware.
M = mandatory
Table 52: AdvancedTCA and AMC Commands
COMMAND
AdvancedTCA
Get PICMG Proper ties
FRU Control
Get FRU LED Properties
Get LED Color Capabilities
Set FRU LED State
Get FRU LED State
Get Device Locator Record ID
AMC
Set AMC Port State
Get AMC Por t State
Set Clock State
Get Clock State
[1] Only "FRU Control - Cold Reset" and "FRU Control Quiesce" are supported.
www.kontron.com
SPEC. TABLE NETFN
PICMG 3.0 TABLE
3-9 PICMG
3-22 PICMG
3-29 PICMG
3-25 PICMG
3-26 PICMG
3-27 PICMG
3-29 PICMG
AMC.0 TABLE
3-27 PICMG
3-28 PICMG
3-44 PICMG
3-45 PICMG
User Guide
AM4024(E)
CMD KONTRON SUPPORT
ON MMC
M
00h M / Yes
04h M / Yes [1]
05h M / Yes
06h M / Yes
07h M / Yes
08h M / Yes
0Dh M / Yes
O
19h O / Yes
1Ah O / Yes
2Ch O / Yes
2Dh O / Yes
79