Dimm Installation; Dimm Removal - Supermicro SuperServer SYS-111E-FWTR User Manual

DIMM Installation

1. Insert the desired number of DIMMs
into the memory slots based on the
recommended DIMM population table.
2. Push the release tabs outwards on both
ends of the DIMM slot to unlock it.
3. Align the key of the DIMM module with the
receptive point on the memory slot.
4. Align the ends of the module against the
receptive points on the ends of the slot.
5. Press the ends of the module straight
down into the slot until the module snaps
into place.
6. Press the release tabs to the lock positions
to secure the DIMM module into the slot.

DIMM Removal

Press both release tabs on the ends of the
DIMM module to unlock it. Once the DIMM
module is loosened, remove it from the
memory slot.
Chapter 3: Maintenance and Component Installation
JUIDB1
MH1
MH15
MH6
MH9
MH10
FAN6 FAN5 FAN4
Release Tabs
45
COM1
VGA
MH2
USB3/4
(3.2 Gen 1)
LAN2 LAN1
IPMI_LAN
USB0/1
BMC
JNCSI1
JPFR2
JTPM
X550
BT1
MH4 MH17
M.2 NVME
JBT1 M.2-P
CMOS CLEAR
USB2
PCH
JRK1
MAC CODE
SAN MAC
BIOS LICENSE
JVRM1
CPU
JPI2C
MH8
FAN3
FAN2 FAN1
MH7
Ends
Press both ends
straight down into
the memory slot.