This chapter describes optional system components and installation procedures.
6.1 Optional Parts List
Description
Power cable
Air shroud
TPM security module
6.2 Power Cable
The CBL-PWEX-1043 cable connects from PDB for extra PCIe power (2x4, PH4.2, M to
2x2x3, PH4.2, 2x2x1, PH4.2, F, 40/40/41/41).
6.3 Air Shrouds
The MCP-310-51505-0B Mylar air shroud provides cooling to the optional half-height NVIDIA
T4 GPU cards.
The MCP-310-51506-0B Mylar air shroud provides cooling to the optional full-height, full-
length add-on cards.
6.4 TPM Security Module
SPI capable TPM 2.0 (AOM-TPM-9670V) or 1.2 (AOM-TPM-9671V) with Infineon 9670
controller, vertical form factor The JTPM1 header is used to connect a Trusted Platform
Module (TPM). A TPM is a security device that supports encryption and authentication in
hard drives. It enables the motherboard to deny access if the TPM associated with the hard
drive is not installed in the system.
Details and installation procedures are at:
http://www.supermicro.com/manuals/other/TPM.pdf
Chapter 6
Optional Components
Optional Parts List
72
Chapter 6: Optional Components
Part Number
CBL-PWEX-1043
MCP-310-51505-0B
MCP-310-51506-0B
AOM-TPM-9670V
AOM-TPM-9671V
Quantity
1
1
1