Transferring From Maintenance Bypass Mode To Normal Mode - Huawei UPS5000-A User Manual

UPS5000-A-(30 kVA-120 kVA) User Manual
User Manual
Step 3 After you turn on the maintenance bypass switch, the Maint. breaker closed
alarm is displayed on the LCD and WebUI.
----End
4.8 Transferring from Maintenance Bypass Mode to
Normal Mode
Prerequisites
Before transferring the UPS from maintenance bypass mode to normal mode,
ensure that the bypass input and output are normal.
Procedure
Step 1 Turn off the maintenance bypass switch.
1.
2.
Issue 15 (2022-11-15)
Figure 4-10 Turning on the maintenance bypass switch (60 kVA/80 kVA/120
kVA)
NO TICE
Turn the maintenance bypass switch from the ON position to the OFF
position.
Lock the maintenance bypass switch if a lock is available.
Copyright © Huawei Digital Power Technologies Co., Ltd.
4 Single UPS Commissioning
124