Huawei UPS5000-A User Manual page 26

UPS5000-A-(30 kVA-120 kVA) User Manual
User Manual
●
●
●
Moving Heavy Objects
●
●
●
●
●
●
●
●
●
●
●
●
●
Issue 15 (2022-11-15)
Do not install other devices on the top of the equipment without evaluation
by the Company.
When performing operations over the top of the equipment, take measures to
protect the equipment against damage.
Use correct tools and operate them in the correct way.
Be cautious to prevent injury when moving heavy objects.
If multiple persons need to move a heavy object together, determine the
manpower and work division with consideration of height and other
conditions to ensure that the weight is equally distributed.
If two persons or more move a heavy object together, ensure that the object
is lifted and landed simultaneously and moved at a uniform pace under the
supervision of one person.
Wear personal protective gears such as protective gloves and shoes when
manually moving the equipment.
To move an object by hand, approach to the object, squat down, and then lift
the object gently and stably by the force of the legs instead of your back. Do
not lift it suddenly or turn your body around.
Move or lift the equipment by holding its handles or lower edges. Do not hold
the handles of modules that are installed in the equipment.
Do not quickly lift a heavy object above your waist. Place the object on a
workbench that is half-waist high or any other appropriate place, adjust the
positions of your palms, and then lift it.
Move a heavy object stably with balanced force at an even and low speed. Put
down the object stably and slowly to prevent any collision or drop from
scratching the surface of the equipment or damaging the components and
cables.
When moving a heavy object, be aware of the workbench, slope, staircase,
and slippery places. When moving a heavy object through a door, ensure that
the door is wide enough to move the object and avoid bumping or injury.
When transferring a heavy object, move your feet instead of turning your
waist around. When lifting and transferring a heavy object, ensure that your
feet point to the target direction of movement.
When transporting the equipment using a forklift truck, ensure that the forks
are properly positioned so that the equipment does not topple. Before moving
the equipment, secure it to the forklift truck using ropes. When moving the
equipment, assign dedicated personnel to take care of it.
Choose sea or roads in good conditions for transportation as transportation
by railway or air is not supported. Avoid tilt or jolt during transportation.
Ensure that tilt angle of the cabinet meets the requirements shown in the
figure. The tilt angle α of the packed cabinet must be less than or equal to
Copyright © Huawei Digital Power Technologies Co., Ltd.
1 Safety Information
18