Single Ups Installation (30 Kva/40 Kva); Installing The Chassis - Huawei UPS5000-A User Manual

UPS5000-A-(30 kVA-120 kVA) User Manual
User Manual
Step 9 Push the cabinet along the sliding plate to the installation position.
----End

3.2 Single UPS Installation (30 kVA/40 kVA)

3.2.1 Installing the Chassis

Tower-mounted Installation
Step 1 Assemble support bases. When you assemble two modules, align the connecting
buckle with the hole.
Figure 3-10 Assembling support bases
Step 2 Pull out the rear handle from the device.
1.
2.
Issue 15 (2022-11-15)
Loosen the screws on the back-end handle anticlockwise.
Pull the handle out of the groove until the positioning kit is exposed.
Copyright © Huawei Digital Power Technologies Co., Ltd.
3 Installation
68