Table of Contents
Advertisement
CS 2x00/DMS table definitions and examples
SCAIPROF
The SCAIPROF table serves as a lookup table for switch computer application
interface (SCAI) CompuCALL service profiles. A service profile is a set of
CompuCALL messages and associated options that are available during a
highest level of messaging that the link can support. The subservice must be
datafilled in table SCAISSRV to put it in this table. The service ID is also
datafilled in this table as part of the KEY field.
NORTEL 1(CTXEVENT13$) (ACDEVENT12$) (ROUTING35$) (TPCC14$)
(RESOURCE11$) (TPAC12$) (CALLINIT07$) (SCAI3WC14£)
(SCAIMWTI13$) (DNQUERY07$) (SCAICC08$) (TPQC10$) (ICCM10$)
(CPEVENT14$)$
Note: The $ after the subservice name denotes a default subservice that was
already datafilled in table SCAISSRV.
SCAISSRV
The SCAISSRV table acts as a reference table for CompuCALL service
categories. This table sets the type of data you receive during the call flow for
each type of CompuCALL message. This table can be changed, but Nortel
strongly recommends you do not change it from the default without careful
engineering and customer call flow consideration.
CTXEVENT12$ CTXEVENT (SETOFFHK Y Y Y) (CALLOFFR Y Y Y Y Y
Y Y Y Y Y Y Y Y Y) (CALLANSWR Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y)
(CALLREL Y Y Y Y) (CALLNAME Y Y Y Y Y)$
CUSTNTWK
The CUSTNTWK table is used to define options available to the customer
group. This table only needs one option added to the customer group that was
defined in the BGDATA table. The option ECM must be assigned to the
customer group so that non-ACD lines with the option ECM added to them in
the Servord application, can be controlled or monitored with the CTI.
CUSTNAME NETNAME NETCGID DNREVXLA OPTIONS TAS1 PRIVATE
1 $ (CLID INTRAGRP) (ECM) (NTWKEMW) (RNID INTRAGRP) $
162
Standard 3.02
LinkPlexer
Advertisement
Table of Contents
