Table of Contents
Advertisement
October 2007
Configuring Periphonics VPS/is (Peri-ICM) to
use LinkPlexer
To configure a Peri-ICM package on a Link Server for use with LinkPlexer 6.0,
you must configure the PBX Link connection.
To configure the PBX Link connection
1
Locate the hosts file in C:\WINNT\system32\drivers\etc\hosts on the Peri-
ICM server.
2
Edit the hosts file by adding the PBX Link IP address using the PBX
Configuration Edits, for example: 192.84.161.227 pbxlink.
3
For CS 2x00/DMS connection with PERI-ICM, Contact Center Manager
Server or TAPI server, add the LinkPlexer (CLAN) IP address as pbxlink
in the hosts file.
For more information about configuring the Peri-ICM package, see MPS and
VPS/is interface to M1/DMS100 (Peri-IPML v2.0, Peri-ICM v2.0 (# P0988599).
Installation and Configuration Guide
Configuring and maintaining LinkPlexer 6.0
117
Advertisement
Table of Contents
