Table of Contents
Advertisement
October 2007
Parameter
Password
Link Sets Name
6
In the Link Sets section, click Add.
Result: The Linkset dialog box appears.
7
In the Name box, type the name for this link set.
Note: The link set name is defined by the LinksetName parameter in the
LPConfig.ini file, and by the LINKSET parameter in the CS 2x00/DMS
switch SCAICOMS table.
8
Click OK to return to the Add ICM customer to switch dialog box.
9
In the Links section, click Add.
Result: The Link dialog box appears.
10
In the Name box, type the name of this link.
Installation and Configuration Guide
Configuring and maintaining LinkPlexer 6.0
LPConfig.ini file
parameter
Password
TcpLinkSetName
CS 2x00/DMS switch
table and parameter
SCAIGRP table,
PASSWORD parameter
SCAICOMS table,
LINKSET parameter
115
Advertisement
Table of Contents
