Nortel CallPilot Mini Reference Manual page 50

50 Chapter 7 Message Notification
To set up Message Notification to more than one destination
You can receive notification of a message at a maximum of five different destination numbers.
The following steps show you how to enter a telephone number destination and then add a pager
destination for the first time.
1 Dial the CallPilot Messaging access number, then enter your mailbox number and press
2 Enter your password and press
3
Press
¡ Þ Û
4
Press to set up Message Notification.
Ú
5
Press to choose a destination telephone number.
Ú
6
Enter the destination telephone number and press
cannot be longer than 30 digits.
7
Press to accept the destination telephone number, or
£
• press
¥
• press
Û
characters. After you add special characters, press
For more information about special characters, refer to
destination number" on page
8
Enter the start time for Message Notification. You must enter four digits. Any single-digit hour
or minute must be preceded by a zero. For example, enter 0800 for eight o'clock in the
morning, or 1700 for five o'clock in the evening.
9
Press to accept the start time.
£
10 Enter the time when Message Notification is to stop. This is a four digit field. Precede a
single-digit hour or minute with a zero.
11 Press to accept the stop time.
£
12 Press to set up another destination number.
Ú
13 Press to select a pager number destination.
Ü
14 Enter the destination pager number and press
15 Press
to accept the destination pager number, or
£
• press
¥
• press
Û
characters. After you add special characters, press
For more information about special characters, refer to
destination number" on page
16 Press to accept the default pager message. The default pager message that CallPilot sends
£
is the CallPilot extension. This is the sequence of digits that is sent after the pager service is
dialed, to notify you of who is paging you
or
P0989496 03
.
£
to open the Message Notification menu.
to cancel and reenter the number
to add special characters and use your dialpad or follow the voice prompts to add
38.
to cancel and reenter the number
to add special characters and use your dialpad or follow the voice prompts to add
38.
. The destination telephone number
£
to accept the destination number.
£
"Adding special characters to a
.
£
to accept the destination number.
£
"Adding special characters to a
.
£