NETGEAR ProSafe GS105 Installation Manual
  1. Manuals
  2. Brands
  3. NETGEAR Manuals
  4. Switch
  5. GS105 - ProSafe Switch
  6. Installation manual

NETGEAR ProSafe GS105 Installation Manual

10/100/1000 mbps gigabit ethernet 5-port switch
Hide thumbs Also See for ProSafe GS105:

Advertisement

Table of Contents

5-Port Switch
GS105
10/100/1000 Mbps Gigabit Ethernet
Installation Guide

Advertisement

Table of Contents
loading

Related Manuals for NETGEAR ProSafe GS105

Summary of Contents for NETGEAR ProSafe GS105

  • Page 1 5-Port Switch GS105 10/100/1000 Mbps Gigabit Ethernet Installation Guide...

  • Page 2: Installation Overview

    Each port on the GS105 switch automatically configures itself correctly when you plug in a device’s cable. If you have a problem with your switch, NETGEAR offers support 24 hours a day and 7 days a week on the Web (www.NETGEAR.com), by e-mail (support@NETGEAR.com) and by phone (see the provided support information card for phone numbers).
  • Page 3 Support information card If you don’t have everything listed above, see the support information card for contact infor- mation. If you’re missing the support information card itself, get contact information at www.NETGEAR.com in the Technical Support area. Wall-mount hardware Power adapter...

  • Page 4: Prepare To Install The Switch

    Prepare to Install the Switch Decide where you want to place the switch. Find a flat horizontal surface — such as a table, desk or shelf. The switch comes with wall-mounting screws. You’re welcome to use the screws if you want to hang the switch in an open space on a wall.

  • Page 5: Install Switch/Connect Other Devices

    Ethernet ports on the switch. 3. Connect the power adapter’s cord into the back of the switch and then plug the adapter into a power source (such as a wall socket or power strip).

  • Page 6: Troubleshooting

    • Make sure you are using the NETGEAR power adapter supplied with your switch. The Port number light is not lit for a connected device or stays on continuously There’s a hardware connection problem.

  • Page 7: Statement Of Conditions

    In the interest of improving internal design, operational function, and/or reliability, NETGEAR reserves the right to make changes to the product described in this document without notice. NETGEAR does not assume any liability that may occur due to the use or application of the product(s) or circuit layout(s) described herein.

  • Page 8: Technical Support

    ©2003 NETGEAR, Inc. NETGEAR, the Netgear logo, The Gear Guy, Auto Uplink and Everybody's Connecting are trademarks or registered trademarks of Netgear, Inc. in the United States and/or other countries. Microsoft and Windows are registered trademarks of Microsoft Corporation in the United States and/or other countries. Other brand and product names are trademarks or registered trademarks of their respective holders.

Table of Contents