Browser Connection; Additional Accessories; System Requirements; Establishing The Connection - Bosch AUTODOME 7100i User Manual

AUTODOME 7100i
1

Browser connection

1.1

Additional Accessories

* Refer to the chapter Preparing Wiring in the Installation Manual.
1.2

System requirements

–
–
–
–
–
–
1.3

Establishing the connection

The unit must have a valid IP address to operate on your network and a compatible subnet
mask.
By default, DHCP is pre-set at the factory to On plus Link-Local so a DHCP server assigns an
IP address. The default IP address of this device is 192.168.0.1.
You can use the Configuration Manager to find an IP address. Download the software from
http://downloadstore.boschsecurity.com.
1.
2.
3.
If a RADIUS server is used for network access control (802.1x authentication), you must
configure the device before the device can communicate with the network.
Bosch Security Systems B.V.
Quantity Component
100 m Ethernet cable (Cat5e or better)
maximum
* Power cable (24 VAC)
* Power cable (36 VDC)
* Alarm wiring as needed
* Audio wiring as needed
* PoE midspans IEEE 802.3bt Type 3 (60W)
* SFP modules (refer to chapter Support for Fiber optic cable installation,
in the Installation Manual)
* Media Converter
* Direct fiber connection
1 Full-sized SD card. Recommended: industrial SD cards from Western
Digital (sold separately by Bosch)
Computer with Intel Xeon processor or better
Graphic card with performance that matches or is better than the resolution of the
camera
Windows 10 or later
Network access
Google Chrome, Microsoft Edge, or Mozilla Firefox
- or -
Application software, for example, Application software, for example,
Video Security Client, BVMS, or Project Assistant app.
Configuration Manager 7.60 (or newer)
Start the Web browser.
Enter the IP address of the unit as the URL.
During initial installation, confirm any security questions that appear.
User Manual
Browser connection | en
2022-12 | V01 | DOC
5