Bosch AUTODOME 7100i User Manual page 44

44 en | Configuration
If the application variant is set to DEWARP, also an E-PTZ parameter is offered listing the
available options for selection.
1.
2.
3.
4.
5.
6.
Pre-position
Select the appropriate pre-position to record. Options are Tour A, Tour B, Custom Tour, and
configured pre-positions.
Settings for selected recordings
Recording includes
Select what is to be included in the recordings:
–
–
Standard recording
Select the mode for standard recordings:
–
–
–
Stream
Select the stream to be used for standard recordings:
–
–
–
Select the stream to be used for alarm recordings:
–
–
–
Check the encoding interval and bit rates from profile: box and select an encoder profile to
set the associated encoding interval for alarm recording.
Export to account
To send standard H.264 or H.265 files to the target address, select an account and check
Export from memory.
If the target has not yet been defined, click Configure accounts to jump to the Accounts page
where the server information can be entered.
Alarm recording
Select a period for the Pre-alarm time from the list box.
Select a period for the Post-alarm time from the list box.
2022-12 | V01 | DOC
Click one of the tabs to edit the corresponding profile.
In the table, click the name of the camera input for which you want to edit the settings.
You can select multiple camera inputs by holding down the shift or [Ctrl] key as usual in
Windows. The following settings apply to all selected entries.
If necessary, click the Default button to return all settings to their default values.
Click the Copy Settings button if you want to copy the currently visible settings to other
profiles. A new window will open and you can select the profiles in which you want to
copy the settings.
For each profile, click the Set button to save the settings in the unit.
Audio: If audio is not enabled, Off is shown. Click on Off and the page is redirected to
the Audio section.
Metadata.
Continuous: the recording proceeds continuously. If the maximum recording capacity is
reached, older recordings are overwritten automatically.
Pre-alarm: recording takes place in the pre-alarm time, during the alarm and during the
post-alarm time only.
Off: no automatic recording takes place.
Stream 1
Stream 2
I-frames only
Stream 1
Stream 2
I-frames only
User Manual
AUTODOME 7100i
Bosch Security Systems B.V.