Bosch AUTODOME 7100i User Manual page 24

24 en | Configuration
If the Custom option is selected, enter values in the X and Y position fields.
Logo stamping
To place a logo on the image, select and upload an uncompressed .bmp file with a maximum
size of 1024x1024 pixels and 16 million colors to the camera. Its position on the image can
then be selected.
This option becomes available when the Camera name stamping option is enabled. Select:
–
–
–
–
Time stamping
This field sets the position of the time overlay. It can be displayed at the Top, at the Bottom or
at a position of your choice that you can then specify using the Custom option. Or it can be
set to Off for no overlay information.
1.
2.
3.
Display milliseconds
If necessary, you can also display milliseconds. This information can be useful for recorded
video images; however, it does increase the processor's computing time. Select Off if you do
not need to display milliseconds.
Alarm mode stamping
Select On to display a text message overlay in the image in the event of an alarm. It can be
displayed at a position of your choice that you can then specify using the Custom option. Or it
can be set to Off for no overlay information.
1.
2.
3.
Alarm message
Enter the message to be displayed in the image in the event of an alarm. The maximum text
length is 31 characters.
Info stamping
Check this box to activate the stamping.
The Position (XY) is displayed to enter the values in the X and Y position fields.
Title region
Select On to set or to edit the position of the Title region on the OSD.
The fields Position (XY) and (0...255) appear.
1.
2.
Select Off to hide the region from view.
2022-12 | V01 | DOC
Off : This option is disabled.
To the left of the name: The logo will be positioned to the left of the Camera name
stamping
To the right of the name: The logo will be positioned to the right of the Camera name
stamping
Logo only: The logo will be shown without the Camera name stamping.
Select the desired option from the list.
If you select the Custom option, additional fields are displayed where you can specify the
exact position (Position (XY)).
In the Position (XY) fields, enter the values for the desired position.
Select the desired option from the list.
If you select the Custom option, additional fields are displayed where you can specify the
exact position (Position (XY)).
In the Position (XY) fields, enter the values for the desired position.
In the field Position (XY), specify the exact position. (The default is 10.)
In the field (0...255), enter the position range. (The default is 176).
User Manual
AUTODOME 7100i
Bosch Security Systems B.V.