Pre-Position Settings - Bosch AUTODOME 7100i User Manual

AUTODOME 7100i
–
–
–
–
Include in standard tour (marked with *)
Select this checkbox to include the pre-position in the standard tour.
Upload
Click the button to upload the tour configuration to the camera.
Dwell times
Standard pre-position tour
Select the dwell time in seconds or minutes for the Standard pre-position tour.
Custom pre-position tour
Select the dwell time in seconds or minutes for the Custom pre-position tour.
4.4.9

Pre-position settings

Pre-position
Select the number of the pre-position for which to save specific settings.
Name
Change the name of the pre-position if needed. Click Set to save the new name.
Automatic exposure
Select the automatic exposure mode. Options are Full-screen or Defined
Full-screen (Default)
The camera computes the lighting condition of the entire scene. Then the camera determines
the optimum level of iris, gain, and shutter speed.
Defined
Move and adjust the size of the green box to cover an interesting area.
The camera computes the lighting condition to the center spot of the specified area. Then the
camera determines the optimum level of iris, gain, and shutter speed to get an image.
Note: the size shape of the specified area does not matter.
Focus
Autofocus
The autofocus function continuously adjusts the lens automatically to the correct focus for the
sharpest picture.
Select one of the options from the dropdown list:
–
–
–
Bosch Security Systems B.V.
Select the pre-position from the Pre-positions list and click the triangle button to copy it
to the Custom tour list.
Adjust the custom tour sequence by moving a pre-position up or down.
To start the Custom tour:
Return to the Live page.
Select Special Functions.
Click Custom tour
- or -
Select AUX Control.
Type 7 in the input box.
Click AUX on.
To stop the tour, type 7 and click AUX off.
One push: activates Autofocus after the device stops moving. Once focused, Autofocus
becomes inactive until the device is moved again.
Autofocus: Autofocus is always active.
Manual: Autofocus is inactive.
User Manual
Configuration | en 39
2022-12 | V01 | DOC