Licenses; Certificates - Bosch AUTODOME 7100i User Manual

60 en | Configuration
Notice!
Before starting a firmware update, make sure to select the correct upload file.
i
Do not interrupt the firmware installation. Even changing to another page or closing the
browser window leads to interruption.
Uploading the wrong files or interrupting the upload can result in the device no longer being
addressable, requiring it to be replaced.
Caution!
Do not remove power to the unit during a factory default or a firmware update. Wait at least
!
two minutes for the default process to complete. If the unit appears to be "frozen" after two
minutes, then reboot the unit. Refer to Troubleshooting for more details.
Progress
The progress bar displays the progress of the firmware upload.
Note: Once the progress bar reaches 100%, a reset page may appear. If this page appears,
allow the reset page to complete its action.
Upload history
Click Show to view the firmware upload history.
Configuration
Click Browse... to navigate to the required firmware file (*.fw).
Note: Ensure that the file to be loaded comes from the same unit type as the unit that you
want to configure.
Click Upload to begin transferring the file to the unit. Click OK to the warning message to
continue the firmware upload, or Cancel to stop the upload.
Click Download to save the camera settings to a file to upload to the same camera or to a
similar camera in the future.
Maintenance log
Download an internal maintenance log from the device to send it to Customer Service for
support purposes. Click Download and select a storage location for the file.
4.8.2

Licenses

This window is for the activation of additional functions by entering activation codes. An
overview of installed licenses is shown. The installation code of the unit is also displayed here.
4.8.3

Certificates

Add a certificate/file to the file list
Click Add.
In the Add certificate window choose either:
–
–
–
Delete a certificate from the file list
Click the trashcan icon to the right of the certificate. The Delete file window appears. To
confirm deletion, click OK. To cancel deletion, click Cancel.
2022-12 | V01 | DOC
Upload certificate to select a file that is already available:
– Click Browse to navigate to the required file.
– Click Upload.
Generate signing request for a signing authority to create a new certificate:
– Fill in all the required fields and click Generate.
Generate certificate to create a new self-signed certificate:
– Fill in all the required fields and click Generate.
User Manual
AUTODOME 7100i
Bosch Security Systems B.V.