Bosch AUTODOME 7100i User Manual page 29

AUTODOME 7100i
This mode is used for monitoring fast moving objects like cars in traffic scenes. Motion
artifacts are minimized and the image is optimized for a sharp and detailed picture in color
and monochrome.
–
This mode provides a more vivid image with increased contrast, sharpness, and saturation.
–
In this mode, the camera does not switch to monochrome mode at low light levels. The mode
is optimized to minimize motion artifacts and to capture the color of vehicles/pedestrians and
traffic lights, even at night, for scenarios such as city surveillance and traffic monitoring.
–
Illuminator is used to optimize performance when using an illuminator accessory.
–
If necessary, select a custom mode.
–
If necessary, select a second custom mode.
Mode ID
The name of the selected mode is displayed.
Copy mode to
Select the mode from the drop-down menu to which you wish to copy the active mode.
Restore mode defaults
Click Restore Mode Defaults to restore the factory default scene modes. Confirm your
decision.
4.4.2.1 Picture Settings
Color
White Balance
Adjusts the color settings to maintain the quality of the white areas of the image.
–
–
–
–
–
–
Red Gain
The red gain adjustment offsets the factory white point alignment (reducing red introduces
more cyan).
Blue Gain
The blue gain adjustment offsets the factory white point alignment (reducing blue introduces
more yellow). It is only necessary to change the white point offset for special scene
conditions.
Note: The fields Sodium red level and Sodium blue level appear only when the value in the
field White balance is "Sodium lamp auto" or "Sodium lamp."
This feature is not supported by 1080p resolution devices.
Saturation
Select the percentage of light or color in the video image.
Color hue
Select the degree of color in the video image.
Bosch Security Systems B.V.
Vibrant
Color Only (Traffic)
Illuminator
Custom mode #1
Custom mode #2
ATW: allows the camera to adjust color reproduction continuously.
Indoor: white balance tracking for indoor use.
Outdoor: white balance tracking for outdoor use.
AWB hold: places the ATW on hold and saves the color settings.
Extended ATW (default): allows the camera to adjust constantly for optimal color
reproduction.
Manual: Red and Blue gain can be set manually to a desired position.
User Manual
Configuration | en 29
2022-12 | V01 | DOC