Connection In Applications; Use Latest Software - Bosch AUTODOME 7100i Installation Manual

Hide thumbs Also See for AUTODOME 7100i:
Table of Contents

Advertisement

10
en | Safety
UL MAKES NO REPRESENTATIONS, WARRANTIES, OR CERTIFICATIONS WHATSOEVER
REGARDING THE PERFORMANCE OR RELIABILITY OF ANY SECURITY OR SIGNALING-RELATED
FUNCTIONS OF THIS PRODUCT.
1.6

Connection in Applications

24VAC / 36VDC power source: This unit is intended to operate at 24 VAC or 36 VDC power if
IEEE 802.3bt type 3 60W (non IR models), type 4 90W (IR models) is not available. User-
supplied wiring must be in compliance with electrical codes (Class 2 power source) and
shielded wire must be used.
PoE: Use only approved PoE (IEEE 802.3bt) devices: Type 3 60W for non IR models and Type 4
90W for IR models. Power-over-Ethernet can be connected at the same time as 24VAC or at
the same time as 36VDC power supply. If auxiliary power (24 VAC or 36 VDC) and PoE (IEEE
802.3bt) are applied simultaneously, the camera selects PoE over the auxiliary input.
For full feature support of the AUTODOME 7100i camera, an IEEE 802.3bt Type 3 60W
midspan from Bosch should be used for non IR models and the IEEE 802.3bt Type 4 90W
midspan should be used for IR models.
1.7

Use latest software

Before operating the device for the first time, make sure that you install the latest applicable
release of your software version. For consistent functionality, compatibility, performance, and
security, regularly update the software throughout the operational life of the device. Follow
the instructions in the product documentation regarding software updates.
The following links provide more information:
Bosch assumes no liability whatsoever for any damage caused by operating its products with
outdated software components.
Notice!
Bosch strongly recommends upgrading to the latest firmware for the best possible
i
functionality, compatibility, performance and security.
Check
version available.
2023-02 | V01 |
General information:
https://www.boschsecurity.com/xc/en/support/product-security/
Security advisories, that is a list of identified vulnerabilities and proposed solutions:
https://www.boschsecurity.com/xc/en/support/product-security/security-advisories.html
http://downloadstore.boschsecurity.com/
regularly to see if there is a new firmware
Installation Manual
AUTODOME 7100i│AUTODOME 7100i IR
Bosch Security Systems

Advertisement

Table of Contents
loading

Table of Contents