Sectors; Miscellaneous; Illuminator; Audio - Bosch AUTODOME 7100i User Manual

40 en | Configuration
Day near limit [m]
Select the distance (in meters), from 0.1 to 20 m, for the minimum distance of the zoom focus
during the day.
Night near limit [m]
Select the distance (in meters), from 0.1 to 20 m, for the minimum distance of the zoom focus
during the night.
4.4.10

Sectors

To define a title for sectors:
1.
2.
3.
4.4.11

Miscellaneous

Fast address
This parameter allows the appropriate camera to be operated via the numerical address in the
control system. Enter a number between 0000 and 9999, inclusive, to identify the camera.
4.4.12

Illuminator

Note: This menu page is valid for AUTODOME 7100i IR models only.
IR mode
Select the appropriate IR mode to control the IR illuminators:
–
–
IR operation range
Select the appropriate range of operation for the IR illuminator.
Maximum IR intensity
Select the percentage of maximum intensity of the infrared (IR) light.
4.4.13

Audio

You can set the gain of the audio signals to suit your specific requirements. The current video
image is shown in the small window next to the slide controls to help you check the audio
source and improve assignments. Your changes are effective immediately.
If you connect via Web browser, you must activate the audio transmission on the 'Live'
functions page. For other connections, the transmission depends on the audio settings of the
respective system.
Audio
The audio signals are sent in a separate data stream parallel to the video data, and so increase
the network load. The audio data are encoded according to the selected format and require
additional bandwidth. If you do not want any audio data to be transmitted, select Off.
Input volume
Set the input volume using the slide.
Line Out
Set the line output gain using the slider.
Recording format
Select a format for audio recording. The default value is 48 kbps. You can select 80 kbps,
G.711 or L16 depending on the required audio quality or sampling rate.
2022-12 | V01 | DOC
Place the cursor in the input box to the right of the sector number.
Type a title for the sector, up to 40 characters long.
To blank the sector, click the check box to the right of the sector title.
Off - This mode turns off the illuminators.
Auto - This mode activates the 850 nm IR array in low-light scenes (for example, at night),
and deactivates the IR array in scenes with bright light (for example, during a sunny day).
User Manual
AUTODOME 7100i
Bosch Security Systems B.V.