Ssl Network I/O Controller; Installing Network I/O Controller; Network Configuration - Pc - Solid State Logic SB i16 User Manual

SB i16 and SB 8.8 User Guide

SSL Network I/O Controller

Installing Network I/O Controller

When SSL Network I/O is used without an SSL console, configuration and control is achieved using
the SSL Network I/O Controller PC application. This can be downloaded from the SSL website as part
of the Network I/O Stagebox upgrade package or as a standalone installer.
Locate and run the Network I/O Controller installer and follow the on-screen prompts to install the
application.
Application data is stored per Windows user account, allowing each user's configuration of device
filtering, sorting and application window size to be retained.

Network Configuration - PC

Once Network I/O Controller is installed, connect the Windows PC to the same subnet as the
Network I/O. The SSL Network I/O Controller application uses the network adapters configured in
Dante Controller for communication. Before starting Network I/O Controller first open Dante
Controller and select the network adaptors connected to the Dante network. 'Use shared Dante
interface' must be selected to ensure all applications using the Dante network use the correct
adaptors. Subsequent changes to network settings may require Network I/O Controller to be
restarted.
TCP/IP is used to communicate with the unit, so check Windows firewall settings if communications
are not working.
Set the computer to 'Never Sleep' to maintain communication.
7