Devices View - Solid State Logic SB i16 User Manual

SB i16 and SB 8.8 User Guide

Devices View

The Devices tab provides management of the I/O devices displayed in the Control View.
Device Filtering allows Network I/O device types to be hidden, both from the Control View and
the Control View Filtering and Sorting section. An example use case may be to hide all
compensated devices so that the Control View only shows the gain tracked signals, not the
compensated split feeds.
Control View Filtering and Sorting provides control of the order in which devices are displayed in
the Network View of the Control View, in addition to individual device filtering.
SHOW ALL clears the currently selected device
filters.
HIDE OFFLINE ensures only currently connected
devices are displayed, irrespective of device type.
Column headings can be selected to affect the Sort Order of this table and importantly the order in which
devices are displayed in the Network View of the Control tab.
Selecting the heading for a column will set it as the ordering field and toggle between ascending or
descending. Sorting can be alpha-numeric by Name or Device Type, or numerically by IP address or Index
(discovered order).
Device Filtering is provided for all Network I/O device types available in Network
I/O Controller. These device types can be pre hidden, so they are not visible from
this instance of the software when they are discovered. Device filtering hides the
selected device types from the Control View and the below Control View
Filtering and Sorting table.
Individual devices
can be Hidden from
the Control View.
13