Ownership; Stagebox Ownership; Input Ownership - Solid State Logic SB i16 User Manual

SB i16 and SB 8.8 User Guide

Ownership

Net I/O stageboxes can be controlled by SSL Live or System T consoles and the Network I/O
Controller PC application. Separate Stagebox and Input ownership options are available to prevent
control conflicts between networked consoles and control computers sharing resources.
Press and hold Stagebox Ownership to assign
The current owner is
listed in white or relinquish stagebox ownership

Stagebox Ownership

Stagebox ownership provides general ownership of the stagebox configuration, covering the
following parameters:
Operating level

Pad mode

A stagebox does not require an owner at all times, so can remain unowned if the above settings do
not need to be adjusted.

Input Ownership

Input ownership offers a level of protection to inputs: when an input is owned the input parameters
can only be modified by the device that owns it. Parameters covered by input ownership are:
Mic gain

Phantom power

Mic/line switching

Pad

Input mute

Compensated output recalibration

Audition

Limiter

Note that multiple consoles can share the same input signal but only one device can control the
input parameters. Altering the input settings will affect all consoles using the input.
N.B. Ownership settings are stored on the SB i16 and SB 8.8.
memory on the unit and all channels will reset to unmuted if the unit is repowered.
Press and hold Inputs
Ownership to open the
Ownership menu:
Own All will assign all
unowned inputs
Take All will assign all inputs
including those owned by
another controller
Release All will release
ownership of inputs owned
by the controller
The mute state is stored in volatile
14